How To Choose the Right ESD Floor

The selection of ESD flooring is often one of the most challenging decisions that specifiers and buyers meet in the course of making a world-class ESD program. Installing anti-static coating is a major capital investment.

Specifiers usually turn to a general contractor or distributor of materials, to obtain ESD properties. Unless they specialize in the installation of ESD flooring, these sources will often have limited ESD knowledge of the installation process, or be the result of field-tested products. You can navigate here , if you are interested in purchasing esd flooring products.

Non - Combustible Raised Access Floor System Cement Infilled Raised Computer Floor

Electrostatic dissipative flooring is recommended for use in electronics assembly and test area, flammable storage and processing, and the area of ‚Äč‚Äčammunition. There are a number of terms that are sometimes used incorrectly by the seller to describe the static control flooring.¬†

The conductive floor is not the same thing as a static dissipative floor. Conductive floors are floors that have BVG low (body generation voltage) readings, offering a high level of protection for your product while static flooring products dissipative engineered for use where static discharge control is required, but the resistance of the floor does not need to be as low as that provided by the floor conductive.

In the past, most ESD floorings was determined to be dissipative resistance. The current standard requires conductivity <35million ohm, according to ESD-20.20-2007 which protects the electronic components that are sensitive to body voltage (the voltage generated by a person walking on the floor).

As a result of today’s standards, the final determination is that the ESD floor coating should be chosen solely on the particular property that is applied to the floor.